Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
PARLOR GUITAR CASE http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=45531 |
Page 1 of 1 |
Author: | jsmith [ Sun Apr 12, 2015 10:17 pm ] |
Post subject: | PARLOR GUITAR CASE |
I just finished my first Size 1 parlor, and can't find a case that will accommodate it. I have a "Canadian" parlor case, but it's a flat top number. The lid puts too much pressure on the bridge when I try to close it. I know that I can custom order one from Ameritage, or Cedar Creek, however I'd like to find one "off the rack" so to speak. I sent an email to Martin's customer service department, but haven't heard back from them. Anyone out there have a source? Thanks. |
Author: | meddlingfool [ Sun Apr 12, 2015 11:33 pm ] |
Post subject: | Re: PARLOR GUITAR CASE |
Try the TRIC parlour case. Also look at the Guardian line... |
Author: | DannyV [ Mon Apr 13, 2015 8:07 am ] |
Post subject: | Re: PARLOR GUITAR CASE |
http://www.georgeheinl.com/products/shop/category:26 |
Author: | Mike Collins [ Mon Apr 13, 2015 8:19 am ] |
Post subject: | Re: PARLOR GUITAR CASE |
www.tamarkincompany.net ask for John mc |
Author: | Jim Kirby [ Mon Apr 13, 2015 6:59 pm ] |
Post subject: | Re: PARLOR GUITAR CASE |
Mike Collins wrote: http://www.tamarkincompany.net ask for John mc Is there a special "Mike Collins" signature model for the 1850's Martin? I'll need one this summer. (I hope - but I owe people 4 instruments now. That's a big backlog for me). |
Author: | Clay S. [ Mon Apr 13, 2015 7:16 pm ] |
Post subject: | Re: PARLOR GUITAR CASE |
Washburn made a case for it's parlor reprise that works O.K. for the size 1. It's around $100. I make vintage style cases out of 1/2 inch pine and 1/8th inch plywood. They are not hard to make, but the Washburn case is nicer. |
Author: | JSDenvir [ Mon Apr 13, 2015 7:48 pm ] |
Post subject: | Re: PARLOR GUITAR CASE |
The Larrivee folks have a nice parlor case. |
Author: | Jim Kirby [ Tue Apr 14, 2015 6:57 am ] |
Post subject: | Re: PARLOR GUITAR CASE |
JSDenvir wrote: The Larrivee folks have a nice parlor case. The original Larrivee parlors didn't have a Larrivee case. FQMS, which sold a lot of them, had a case from TKL which fit very well, but I'm not sure if it would fit one with a more standard scale length. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |